Moulting behaviour in the trilobite Oryctocephalus indicus (Reed, 1910) from the Cambrian Miaolingian Series (Wuliuan Stage) of Jianhe, South China.

The accurate interpretation of trilobite moulting behaviour relies on a comprehensive understanding of their moult configurations, yet the focus has commonly been limited to a brief description of the exuviae, and how differences in moulting behaviour further impact the preservation of exuviae is often ignored. This study investigates the configuration, style, and process of moulting in Oryctocephalus indicus through analysis of 88 exuviae collected from the Kaili Formation (Cambrian, Wuliuan) in Guizhou Province, South China. The moult configurations of O. indicus are typically characterised by the lower cephalic unit (LCU), which comprises the librigenae and rostral-hypostomal plate connected as a whole, detached from the cephalon and positioned anterior to the thoracopygon, while the cranidium is mostly absent. From detailed observation and description of the available material, we believe that O. indicus completes its moult through an exuvial gape formed by disarticulation of the facial sutures, rostral sutures and/or sutures of the cephalothoracic joints. Although many exuviae exhibited an opening at the cephalothoracic joint-disjunction of which is usually accompanied by disarticulation of both the facial and rostral sutures-the Salter's configuration produced by the 'Salterian' mode of moulting was not observed. Additionally, the structural characteristics of Henningsmoen's configuration, Harrington's configuration, and Somersault's configuration are discussed based on the exuviae of O. indicus, and Henningsmoen's configuration has been categorised into three types according to the different states of fossil preservation. In this article, apart from promoting further research on moulting behaviour in O. indicus, we also provide a supplement for moult configuration based on the exuviae, which offers new materials for studying moulting behaviour in oryctocephalid trilobites.

Effects of microplastics on the properties of different types of sewage sludge and strategies to overcome the inhibition: A review.

Microplastics have been identified as an emerging pollutant. When microplastics enter wastewater treatment plants, the plant traps most of the microplastics in the sludge during sewage treatment. Therefore, the effects of microplastics on sludge removal performance, and on the physical and chemical properties and microbial communities in sludge, have attracted extensive attention. This review mainly describes the presence of microplastics in wastewater treatment plants, and the effects of microplastics on the decontamination efficiency and physicochemical properties of activated sludge, aerobic granular sludge, anaerobic granular sludge and anaerobic ammonium oxidation sludge. Further, the review summarizes the effects of microplastics on microbial activity and microbial community dynamics in various sludges in terms of type, concentration, and contact time. The mechanisms used to strengthen the reduction of microplastics, such as biochar and hydrochar, are also discussed. This review summarizes the mechanism by which microplastics influence the performance of different types of sludge, and proposes effective strategies to mitigate the inhibitive effect of microplastics on sludge and discusses removal technologies of microplastics in sewage. Biochar and hydrochar are one of the effective measures to overcome the inhibition of microplastics on sludge. Meanwhile, constructed wetland may be one of the important choice for the future removal of microplastics from sewage. The goal is to provide theoretical support and insights for ensuring the stable operation of wastewater treatment plants and reducing the impact of microplastics on the environment.

Target Embolization Combined with Multimodal Thermal Ablation for Solid Tumors by Smart Poly(amino acid)s Nanocomposites.

Noninterventional embolization does not require the use of a catheter, and the treatment of solid tumors in combination with thermal ablation can avoid some of the risks of the surgical procedure. Therefore, we developed an efficient tumor microenvironment-gelled nanocomposites with poly [(l-glutamic acid-ran-l-tyrosine)-b-l-serine-b-l-cysteine] (PGTSCs) coated-nanoparticles (Fe3O4&Au@PGTSCs), from which the prepared PGTSCs were given possession of pH response to an acidic tumor microenvironment. Fe3O4&Au@PGTSC in noninterventional embolization treatment not only achieved the smart targeted medicine delivery but also meshed with noninvasive multimodal thermal ablation therapy and multimodal imaging of solid tumors via intravenous injection. It was worth noting that the results of animal experiments in vivo demonstrated that Fe3O4&Au@PGTSCs have specific tumor accumulation and embolization and thermal ablation effects; at 10 days postinjection, only scars were found at the tumor site. After 20 days, the tumors of model mice completely disappeared. This device is easier to treat solid tumors based on the slightly acidic tumor environment.

Life cycle evolution in the trilobites Balangia and Duyunaspis from the Cambrian Series 2 (Stage 4) of South China.

The evolution process can be reconstructed by tracking the changes in the dynamic characters of life cycles. A number of related trilobites from the Cambrian of South China provide additional information for the study of trilobite evolutionary patterns, which has been hampered by previous incomplete fossil record though. Here, Balangia and Duyunaspis represent related Cambrian oryctocephalid trilobites from South China, are comprehensively discussed over the ontogeny, and the results show that, from B. balangensis via D. duyunensis to D. jianheensis, their exoskeletal morphology shows a directional evolution. Based on the direction of evolutionary changes in the development of Balangia and Duyunaspis, we speculate that Duyunaspis likely evolved from Balangia instead of Balangia evolved from Duyunaspis, as was previously assumed. This inference is also supported by the phylogenetic tree. This research provides not only a better understanding of the mechanisms of evolution in trilobites, but also new insights for the relationship between developmental evolutionary changes and phylogeny in trilobites.

Fe(III) enhances Cr(VI) bioreduction in a MFC-granular sludge coupling system: Experimental evidence and metagenomics analysis.

The influence of Fe(III) on the bioreduction efficiency of Cr(VI) in a microbial fuel cell (MFC)-granular sludge coupling system using dissolved methane as an electron donor and carbon source was explored, and the mechanism of Fe(III) mediating enhancement in the bioreduction process of Cr(VI) in the coupling system was also investigated. Results showed that the presence of Fe(III) enhanced the ability of the coupling system to reduce Cr(VI). The average removal efficiencies of Cr(VI) in the anaerobic zone in response to 0, 5, and 20 mg/L of Fe(III) were 16.53±2.12%, 24.17±2.10%, and 46.33±4.41%, respectively. Fe(III) improved the reducing ability and output power of the system. In addition, Fe(III) enhanced the electron transport systems activity of the sludge, the polysaccharide and protein content in the anaerobic sludge. Meanwhile, X-ray photoelectron spectrometer (XPS) spectra demonstrated that Cr(VI) was reduced to Cr(III), while Fe2p participated in reducing Cr(VI) in the form of Fe(III) and Fe(II). Proteobacteria, Chloroflexi, and Bacteroidetes were the dominant phylum in the Fe(III)-enhanced MFC-granular sludge coupling system, accounting for 49.7%-81.83% of the microbial community. The relative abundance of Syntrophobacter and Geobacter increased after adding Fe(III), indicating that Fe(III) contributed to the microbial mediated anaerobic oxidation of methane (AOM) and bioreduction of Cr(VI). The genes mcr, hdr, and mtr were highly expressed in the coupling system after the Fe(III) concentration increased. Meanwhile, the relative abundances of coo and aacs genes were up-regulated by 0.014% and 0.075%, respectively. Overall, these findings deepen understanding of the mechanism of the Cr(VI) bioreduction in the MFC-granular sludge coupling system driven by methane under the influence of Fe(III).

Metagenomic and extracellular polymeric substances analysis reveals the mechanism of exogenous N-hexanoyl-L-homoserine lactone in alleviating the inhibition of perfluorooctanoic acid on anammox process.

To alleviate the negative effects of perfluorooctanoic acid (PFOA) on nitrogen removal via anaerobic ammonia oxidation (anammox), an exogenous signaling factor (N-hexanoyl-L-homoserine lactone, C6-HSL) was introduced into an anammox reactor. Results showed that 2 µmol/L C6-HSL promoted the nitrogen removal efficiency of the anammox reactor under PFOA stress, with the removal efficiencies of ammonia and nitrite increasing from 79.7 ± 4.8 % and 80.8 ± 3.8 %, to 94.4 ± 4.3 % and 97.1 ± 3.8 %. Exogenous C6-HSL enhanced the compactness of the extracellular proteins, and improved the sludge hydrophobicity. Meanwhile, C6-HSL resulted in a microbial shift, with the relative abundance of Planctomycetes increasing from 30.2 % to 49.5 %. Candidatus Kuenenia stuttgartiensis replaced Candidatus Brocadia sp. BL1 as the dominant species, while the available space for other nitrogen-removing bacteria was reduced. Exogenous C6-HSL promoted the expression of anammox-related genes, such as hzsB and hdh, while denitrifying genes were down-regulated. In addition, the relative abundance of HdtS, which synthesizes AHLs, increased by 0.02446%.

A Simple and Efficient Embolization-Combined Therapy for Solid Tumors by Smart Poly(amino acid)s Nanocomposites.

Interventional embolization and minimally invasive thermal ablation are common clinical methods for treatment of unresectable solid tumors, but they both have many insurmountable disadvantages. Inspired by pH-responsive drug delivery systems, we report the tumor microenvironment-gelled nanocomposites with poly[(l-glutamic acid-ran-l-tyrosine)-b-l-threonine-b-l-cysteine]s (PGTTCs) coating nanoparticles (NPs, Au or Fe3O4) for noninterventional targeted embolization combined with noninvasive thermal ablation therapy of solid tumors by intravenous injection without catheter use. The results of the animal trial in vivo with tumor-bearing mice and rabbits showed superior targeted embolization and therapy and fluorescence/single-photon emission computed tomography/magnetic resonance multimodal imaging effects. Tumors treated with NPs@PGTTCs were shrunken and necrotized within 30 days, the long-term survival rate was more than 80%, and the same effects can be achieved within 15 days when combined with thermal ablation. The method is so simple and efficient for many hard-to-treat tumors within an acidic microenvironment, which is not only a great improvement and innovation in tumor theranostics but also an important development in nanomedicine.

Smart-Polypeptide-Coated Mesoporous Fe3O4 Nanoparticles: Non-Interventional Target-Embolization/Thermal Ablation and Multimodal Imaging Combination Theranostics for Solid Tumors.

Tumor theranostics hold great potential for personalized medicine in the future, and transcatheter arterial embolization (TAE) is an important clinical treatment for unresectable or hypervascular tumors. In order to break the limitation, simplify the procedure of TAE, and achieve ideal combinatorial theranostic capability, here, a kind of triblock-polypeptide-coated perfluoropentane-loaded mesoporous Fe3O4 nanocomposites (PFP-m-Fe3O4@PGTTCs) were prepared for non-interventional target-embolization, magnetic hyperthermia, and multimodal imaging combination theranostics of solid tumors. The results of systematic animal experiments by H22-tumor-bearing mice and VX2-tumor-bearing rabbits in vivo indicated that PFP-m-Fe3O4@PGTTC-6.3 has specific tumor accumulation and embolization effects. The tumors' growth has been inhibited and the tumors disappeared 4 weeks and ≤15 days post-injection with embolization and magnetic hyperthermia combination therapy, respectively. The results also showed an excellent effect of magnetic resonance/ultrasound/SPECT multimodal imaging. This pH-responsive non-interventional embolization combinatorial theranostics system provides a novel embolization and multifunctional theranostic candidate for solid tumors.

Denitrifying anaerobic methane oxidation process responses to the addition of growth factor betaine in the MFC-granular sludge coupling system: Enhancing mechanism and metagenomic analysis.

To solve the problem of the slow growth of denitrifying anaerobic methane oxidation (DAMO) bacteria during the enrichment process, betaine was added as a growth factor and its influence on the mechanism of DAMO process along with the metagenomic analysis of the process in a MFC-granular sludge coupling system was explored. When the addition of betaine was increased to 0.5 g/L and 1.0 g/L, the NO3--N removal increased to 210 mg/L. Also, the increasing betaine dosage in 1st to 4th chambers resulted in a significant increase in dissolved methane concentration which reached a maximum value of 16.6 ± 1.19 mg/L. When the dosage of betaine was increased from 0 g/L to 1.0 g/L, the dominant bacterial phyla in the 1st to 4th chambers changed to Proteobacteria (20.8-50.7%) from Euryarchaeota (42.0-54.1%) and Methanothrix which was significantly decreased by 17.9-37.4%. There was a slight decline in the DAMO microorganism abundance, possibly due to the increased methyl donors limiting the DAMO microorganism growth. Denitrification metabolism pathway module (increased from 0.10% to 0.15%) of Nitrogen metabolism and Formaldehyde assimilation, and serine pathway of Methane metabolism presented an ascendant trend with the increased betaine dosage as determined by the metagenomics analysis of KEGG metabolism pathway.

Effect of hydraulic retention time on the denitrification performance and metabolic mechanism of a multi-chambered bio-electrochemical system.

The effects of hydraulic retention time (HRT) on the denitrification performance of the multi-chambered bio-electrochemistry system and the metabolic mechanism of the microbial community were investigated. Results indicated that the NO3--N and NO2--N removal efficiency was up to 99.5% and 99.9%, respectively. The electricity generation performance of the system was optimum at 24 h HRT, with the maximum power density and output voltage of the fourth chamber to be 471.2 mW/m3 and 602.4 mV, respectively. With the decrease of HRT from 24 h to 8 h, the protein-like substance in extracellular polymeric substance (EPS) of granular sludge was reduced and the fluorescence intensities were weakened. Besides, the abundance of metabolism pathway was the highest at 50.0% and 49.9%, respectively, and the methane metabolism (1.8% and 2.0%, respectively) and the nitrogen metabolism (0.8% and 0.9%, respectively) in Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway played important roles in providing guaranteed stability and efficient removal of organic matter and nitrogen from the system.

Effects of exposure to polyether sulfone microplastic on the nitrifying process and microbial community structure in aerobic granular sludge.

The effects of polyether sulfone (PES) microplastic concentration on the nitrifying process of aerobic granular sludge (AGS) were investigated together with the microbial community structure of AGS. The PES microplastic concentration inhibited the removal of ammonia nitrogen only to a small extent. The average total nitrogen removal rate increased by 5.6% after PES addition. On the 30th day, the addition of 0.5 g/L PES inhibited the specific nitrate reduction rate (SNRR) by 38.84 mg N/(g MLSS·h). Nitrite oxidase (NOR) performance of the AGS were inhibited with addition the PES. According to the high-throughput sequencing results, in the presence of PES, the abundance of Bacillales_Incertae Sedis XII reduced, while the abundance of Anaerolineaceaen increased in the AGS. According to the clusters of orthologous groups (COG) and kyoto encyclopedia of genes and genomes (KEGG), the content of cytochrome c-containing reduced and the Amino Acid Metabolism increased with addition 0.5 g/L PES microplastic.